by ZeroDegrees » Tue Jun 21, 2016 10:39 pm
When I got 'Leanne' from Annapolis, it had a similar issue.
The keel was down almost 1/4" at aft edge of hull joint and
It wiggled from side to side about 3" at the bottom tip.
We ground down to glass all around, placed a jack under the keel
Placed 5200 up in the crack and proceeded to West System Epoxy
2 layers of 18oz Carbon fiber and 2 layers of 24oz Bi Axial E glass
Staggering widths until approx 10" up and down from hull joint.
Seem to do the trick.